Nominal electric power:
Power regulation:
IEC wind class:
Rotor diameter:
Rotor speed:
Rotor:
Swept area:
Tilt angle:
Coning angle:
Blades length:
Tip speed:
Pitch angle:
Pitch bearings:
Air brake, normal:
Air brake, emergency:
Nominal pitch speed:
Mechanical brake:
Brake torque:
RPM max. value:
Generator:
Generator speed:
Loss in generator:
Generator cut-in:
Grid connection:
Yaw motors:
Yaw brakes:
Yaw bearing:
Tower type:
Controller:
Cut-in wind speed:
Cut-out wind speed:
Mass of blade:
Mass of hub:
Mass of nacelle:
Mass total, excl. tower:
Maximum noise level:
|
200/750 kW
Active Stall Regulation (ASR)
IIB
54 m
25.2 rpm at full load
Three blades placed upwind of tower
2290 mē
4°
3.0° forward blade pre-bending
26.0 m
71 m/s at full load
ASR control
Slew rings (4-point ball bearings)
Blade pitch to -20°
Blade pitch to -85° fail safe position
7.5°/second
Fail-safe type disk brake
1.8 times of nominal torque
1600 (50 Hz) or 1920 (60 Hz), observed on the high-speed shaft
Closed, 6/4-pole, asynchronous, induction, IP54
1000/1500 (50 Hz) or 1200/1800 (60 Hz) rpm at sync. speed
3% at nominal power
Thyristor controlled gradual cut-in
50 Hz - 690 V or 60 Hz - 690 V
4 pcs. with electrical brakes built in
4 pcs. hydraulic brakes of disk brake type
Slew ring (4-point ball bearing)
Conical steel tower (40-65 m hub hight)
PLC and microprocessor based
3-4 m/s
20 m/s, basen on 5-min. average
App. 6900 kg (total 3 pieces)
App. 4100 kg
App. 23500 kg
App. 34500 kg
App. 104 dBA
Rights to changes are reserved
|
